Evaluation of gear pitting severity by using various condition monitoring indicators

Sfetcu Camelia Rodica; Korka Zoltan; Bloju Alin Virgil; Traistaru Dalina Elena; Hrimiuc Corneliu: Evaluation of gear pitting severity by using various condition monitoring indicators. In: Analecta technica Szegedinensia, (16) 1. pp. 34-41. (2022)

[thumbnail of engineering_2022_001_034-041.pdf]
Előnézet
Cikk, tanulmány, mű
engineering_2022_001_034-041.pdf

Letöltés (727kB) | Előnézet

Absztrakt (kivonat)

Fault detection techniques based on vibration measurement are implemented to identify in an early stage failures appearing in gear transmissions. Condition monitoring indicators (CMI), like: Root Mean Square (RMS), Crest Factor, Kurtosis, FMO, FM4, Energy ratio, Energy operator, NA4 or NB4, are used to estimate the level of gear faults such as pitting, cracks, spalling, scuffing or scoring. However, in is multitude of indicators, the question that arises is: which CMI is the most sensitive in estimating the severity of defects? Thus, this paper presents an extensive comparison between the before mentioned indicators computed from vibration signals collected on four pinions with different pitting grades, created by artificial means. The pinions where incorporated in a single helical gearbox and the tests were performed on an open-energy test rig at three different input speeds. This comparative study assesses the receptivity of different condition monitoring indicators towards gear pitting failure.

Mű típusa: Cikk, tanulmány, mű
Befoglaló folyóirat/kiadvány címe: Analecta technica Szegedinensia
Dátum: 2022
Kötet: 16
Szám: 1
ISSN: 2064-7964
Oldalak: pp. 34-41
Nyelv: angol
Kiadó: University of Szeged, Faculty of Engineering
Kiadás helye: Szeged
Befoglaló mű URL: https://acta.bibl.u-szeged.hu/77815/
DOI: 10.14232/analecta.2022.1.34-41
Kulcsszavak: Gépészet, Hibaanalízis, Hibakeresés
Megjegyzések: Bibliogr.: 41. p. ; ill. ; összefoglalás angol nyelven
Szakterület: 02. Műszaki és technológiai tudományok
02. Műszaki és technológiai tudományok > 02.03. Gépészmérnöki tudományok
Feltöltés dátuma: 2022. dec. 14. 14:12
Utolsó módosítás: 2023. júl. 13. 10:39
URI: http://acta.bibl.u-szeged.hu/id/eprint/77868
Bővebben:
Tétel nézet Tétel nézet